Skip to main content

Posts

Nose progress

During the time between electrical and insulation I started work on the battery box and electrical compartment at the nose of the trailer. There is still work to be done on it, but honestly I just sort of abandoned it when the opportunity to work on the interior came up. I'll have to go back to it soon though, so that I can order the solar equipment and have somewhere to actually put the batteries. As the house gets closer to being finished, Willow is spending more and more time here- and is getting territorial about it- chasing away the other beasties, and hiding indoors when the neighbor's dogs come for a visit. This trim covers the gap between the siding and the tongue jack. If  the siding had been flush I wouldn't have been able to move the handle. As it is I had to put some notches in where the handle is stored and where it pivots. The top two screws are left exposed in order to allow access to add oil to the jack if ever needed.  Hard to see, but I ha...

Insulation time

A big thank you to Kevin, Brent, Luis, Walter, and Pedro for all their hard work on insulating the house. It looks great. - On Friday the 19th, the guys from Hudson Valley Green Insulation braved the excruciating heat to begin the insulation of the house, and then finished on the following Monday. It was pretty amazing to see the space transform over that short period of time. (Basically since October the interior has looked the same). I'm lucky to be building this on property that is not itself off the grid. The equipment in the truck requires a 100amp breaker- something my house will definitely not have.  I chose to go with closed cell spray foam for a number of reasons. 1- highest R-value for the thin walls. 2- adds structural support, which is a benefit with any racking issues. 3- will not have any moisture issues with closed cell. I also chose to NOT do it myself because for one, it probably would have cost about the same if renting one of those kits, and it is supe...

Odds and ends before insulation

Insulation time is just around the corner. In a little over a week the house is going to be completely sprayed and ready for interior work. Yippee! Until then I'm just doing little bits and pieces and will be doing an idiot check with family members to make sure I don't insulate  and then find out there is a stud 26" on center. All of my wires are run (minus one conduit that I am waiting on until the solar equipment arrives so I can run the necessary wires for the monitoring system). I used a vacuum cleaner to pull a string through the conduit to lead in the fish tape, and for those diy-ers like me who look to youtube for a number of how-tos, after the recommended piece of tape on the end of the string (to help with suction) got stuck in one of the conduits, I found doing a few small knots on the end of the string worked much better.  The battery and electrical compartments is all framed out. Actually, it is already wrapped and has some trim, just n...

Yay for Summer

This past week has been amazing! With summer vacation officially on, and marked with a beautiful cicada landing on my head the first day, my days have been spent doing nothing but work on the house. I have most of the metal roof on (had to order a different rake trim before I could seal it all up), the nose of the trailer is all framed out with the plywood screwed on, and the bathroom fan is cut out with some detail work all done -although I have no photos yet of these happenings. My hope is that in a week and a half I can make the official call to the insulation folk and get this baby ready for the interior work. What I have come to realize is that electric is my achilles heel. I've sought outside help, but most who are local seems to be unfamiliar with dc wiring, or are just generally confused by the whole endeavor. Even the local solar places- they install grid tied systems and so everything goes to an inverter. No concern for things like voltage drop in that scenario. One e...

Winter is over...

It has been a long while since I have posted... this winter has been an intense one. I graduated this month, thesis and all being complete (yay!), and there are only a few more weeks left in the school year (work school that is). Most trying was that my dad was diagnosed with cancer, and anyone who has dealt with a similar illness in the family understand the all encompassing roller coaster that that kind of event entails. Luckily the chemo seems to be doing what it is meant to do, and now we are just getting into a routine and waiting to see what happens after about 6 more months of treatments. Needless to say, it has been a long winter. Now that spring quickly begins to feel like summer I have been able to focus on building again- and it feels so refreshing to throw myself back into it. There are more updates to come shortly, but I thought I would leave you with one of the more exciting developments... my new stove. Made by Andrew over at Navigator Stove Works, it designed for b...

Flooring and Research

Despite the fact that I haven't posted in a while, work continues on the house. The biggest push forward was over the holiday break- when I got the floor in. (I decided to put the floor in at this point because I thought it would be easier to install the plumbing etc.) I did have to go out and buy a pneumatic nailer, because the floor nailers friends lent me were just too powerful... they ripped the flooring to shreds. Once I had the right tool though, the process was painless and rhythmic.      Immediately after finishing the floor, I covered it again with rosen paper and luan so that I didn't have to cry every time I dropped my hammer. Trimmed the insulation around the windows and started putting up the joists for my low loft. The top of the 2x4 sits at 36", which gives me enough room to sit comfortably underneath without craning my neck. Then the cold wave hit.... there's no way my home can retain any heat, even with 3 electric space hea...

Super Psyched About Cedar

I can't get over how much I love this wood!  I still have some errant nails to fix and caulking to do, but every board is up - and just when I was getting the hang of it. That seems like it's going to be a theme of building this house... that as soon as I learn a new skill or figure out a system that works, it's off to the next challenge.  At least now I can make miter cuts like nobody's business.  Got to see the prototype of my tub that Mike is making me- and it's exactly what I was hoping for. Yay! The final version is going to be made from cypress and have hardware  (that won't be visible) to hold it together.  For those interested in wooden bathtubs, I found these "care instructions" on a site that sells them: (the super expensive versions) Congratulations on the purchase of your Cypress Bathtub! Due to the fact that this is a totally organic product, it is very important to maintain  the moisture of t...

Exterior... almost there

The weather this weekend was absolutely amazing, up in the 60s. Perfect for siding.  Now there is just one more drip edge and about 10 boards left to do.  Add caption Bundled up in preparation for Sandy. I was half expecting it to end up on its side in a field but we were lucky here... not even a single drop of water inside.